Lot 1070:
Diamondback DB15 7.62x39mm Semi-Automatic Upper Receiver Assembly with 10 Inch Barrel
Description
This lot features a Diamondback DB15 semi-automatic upper receiver assembly chambered for the 7.62x39mm cartridge. The assembly is built on a black anodized flat-top upper receiver featuring a forward assist, a dust cover, and a standard charging handle. It is equipped with a 10 inch barrel featuring a Parkerized finish and is capped with an A2-style birdcage flash hider secured by a jam nut. The barrel is clearly stamped 7.62X39 near the muzzle. A black M-LOK compatible handguard is secured to the receiver by four Torx-head screws. The included bolt carrier group displays a phosphate finish with visible machining marks on the carrier body. Accompanying the assembly is a single 28-round curved steel magazine featuring horizontal reinforcement ribs. The magazine is marked MADE IN USA and 035 73059 on one side, and 6M9N8 with 7.62 X 39 28RD on the reverse. Two orange rubber safety bands printed 7.62x39mm are currently wrapped around the magazine. Note – All firearms require a federal 4473 background check.
Condition report:
The upper receiver assembly is in good used condition. The black anodized finish on the receiver and handguard is largely intact, showing only minor thinning on the edges and light scuffs around the mounting screws. The charging handle shows typical finish wear from operation. The barrel finish is consistent, showing minor surface oxidation and light handling marks. The bore was not inspected. The bolt carrier group shows moderate use with finish wear on the friction surfaces and gas key. The magazine exhibits minor surface wear and some light oxidation in the recesses of the ribs but appears structurally sound. Mechanical function has not been independently verified.
Share this lot:
